@article {6515,
	title = {Fiber dimensions, lignin and cellulose content of various plant materials and their suitability for paper production},
	journal = {Industrial Crops and Products},
	volume = {19},
	year = {2004},
	note = {Cited By :244Export Date: 7 February 2017CODEN: ICRDECorrespondence Address: Ververis, C.; Department of Botany, Faculty of Biology, University of Athens, GR 157 84 Athens, Greece; email: bverv@yahoo.grReferences: Aguiar, C.L., Biodegradation of the cellulose from sugarcane bagasse by fungal cellulase (2001) Cienc. Tecnol. Aliment., 3 (2), pp. 117-121;(1978) Klason Lignin in Wood and Pulp, , APPITA Testing Committee, Australia; 
Cappelletto, P., Mongardini, F., Barberi, B., Sannibale, M., Brizzi, M., Pignatelli, V., Papermaking pulps from the fibrous fraction of Miscanthus {\texttimes} giganteus (2000) Ind. Crops Prod., 11, pp. 205-210; 
Dinwoodie, J.M., The relationship between fiber morphology and paper properties: A review of literature (1965) Tappi, 48 (8), pp. 440-447; 
Fahn, A., (1990) Plant Anatomytrft, , Pergamon Press, New York; 
(1999) Division of Industry and Commerce Bulletin; 
Han, J.S., Mianowski, T., Lin, Y.-Y., Validity of plant fiber length measurement - A review of fiber length measurement based on kenaf as a model (1999) Kenaf Properties, Processing and Products, pp. 149-167. , Sellers, T., Reichert, N.A. (Eds.), Mississippi State University; 
Huisman, W., Venturi, P., Molenaar, J., Costs supply chains of Miscanthus giganteus (1997) Ind. Crops Prod., 6, pp. 353-366; 
Horn, R.A., (1978) Morphology of Pulp Fiber from Hardwoods and Influence on Paper Strength, , USDA Forest Service. Research Paper FPL 312, For. Prod. Lab, Madison, WI, USA; 
Horn, R.A., Setterholm, V.C., Fiber morphology and new crops (1990) Advances in New Crops, pp. 270-275. , Janick, J., Simon, J.E. (Eds), Timber Press, Portland, OR; 
Hurter, R.W., (1997) Nonwood Plant Fiber Characteristics, , TAPPI 1997 short course notes, TAPPI, Atlanta, USA; 
Hurter, R.W., Riccio, F.A., Why CEOS don{\textquoteright}t want to hear about nonwoods - Or should they? (1998) TAPPI Proceedings, NA Nonwood Fiber Symposium, pp. 1-11. , Atlanta, GA, USA; 
Jimenez, L.A., Baldovin, F.L., Herranz, J.L.F., Evaluation of agricultural residues for paper manufacture (1993) Tappi J., 76 (3), pp. 169-173; 
Kaldor, F.A., The logistics and feasibility of utilizing kenaf fibers for commercial scale processing in existing chemical pulp mills (1998) TAPPI Proceedings, NA Nonwood Fiber Symposium, pp. 161-173. , Atlanta, GA, USA; 
Kellogg, R.M., Thykeson, E., Predicting kraft mill paper strength from fiber properties (1975) Tappi, 58 (4), pp. 131-135; 
Khristova, P., Bentcheva, S., Karar, I., Soda-AQ pulp blends from kenaf and sunflower stalks (1998) Bioresour. Technol., 66, pp. 99-103; 
Kugler, D.E., (1988) Kenaf Newsprint: A Report on the Kenaf Demonstration Project, , Cooperative State Research Service, USDA; 
Law, K.N., Kokta, B.V., Mao, C.B., Fibre morphology and soda-sulphite pulping of switchgrass (2001) Bioresour. Technol., 77, pp. 1-7; 
Lopez, F., Ariza, J., Perez, I., Jim{\'e}nez, L., Comparative study of paper sheets from olive tree wood pulp obtained by soda, sulphite or kraft pulping (2000) Bioresour. Technol., 71, pp. 83-86; 
Madakadze, I.C., Radiotis, T., Li, J., Goel, K., Smith, D.L., Kraft pulping characteristics and pulp properties of warm season grasses (1999) Bioresour. Technol., 69, pp. 75-85; 
Manzanares, M., Tenorio, J.L., Ayerbe, L., Sowing time, cultivar, plant population and application of N fertilizer on kenaf in Spain{\textquoteright}s central plateau (1997) Biomasss Bioenerg., 12 (4), pp. 263-271; 
Mardikis, M., Namatov, E., Energeiakes kalliergies (1999) Georgia Kai Ktinotrophia, 6, pp. 13-20. , (in Greek); 
Matolcsy, G.A., Correlation of fiber dimensions and wood properties with the physical properties of kraft pulp of Abies balsamea L. (Mill.) (1975) Tappi, 58 (4), pp. 136-141; 
Morrison, T.A., Jung, A.G., Buxton, D.R., Hatfield, R.D., Cell-wall composition of maize internodes of varying maturity (1998) Crop Sci., 38, pp. 455-460; 
Neto, P., Fradinho, D., Coimbra, M.A., Domingues, F., Evtuguin, D., Silvestre, A., Cavaleiro, J.A.S., Chemical composition and structural features of the macromolecular components of Hibiscus cannabinus L. grown in Portugal (1996) Ind. Crops Prod., 5, pp. 189-196; 
Neto, P., Nunes, A., Coimbra, M.A., Domingues, F., Evtuguin, D., Silvestre, A., Cavaleiro, J.A.S., Variations in chemical composition and structure of macromolecular components in different morphological regions of Arundo donax L (1997) Ind. Crops Prod., 6, pp. 51-58; 
Nieschlag, H.J., Nelson, G.H., Wolff, J.A., Perdue, R.E., A search for new fiber crops (1960) Tappi, 43 (3), p. 193; 
Nishimura, N., Izumi, A., Kuroda, K., Structural characterization of kenaf lignin: Differences among kenaf varieties (2002) Ind. Crops Prod., 15, pp. 115-122; 
Ogbonnaya, C.I., Roy-Macauley, H., Nwalozie, M.C., Annerose, D.J.M., Physical and histochemical properties of kenaf (Hibiscus cannabinus L.) grown under water deficit on a sandy soil (1997) Ind. Crops Prod., 7, pp. 9-18; 
Paavilainen, L., Modern non-wood pulp mill-process concepts and economic aspects (1998) TAPPI Proceedings, NA Nonwood Fiber Symposium, pp. 227-230. , Atlanta, GA, USA; 
Panoutsou, C., Alexopoulou, E., Nicolaou, A., (1999) Greece: National Report on Biomass, , AFB IV and Bioguide III; 
Panoutsou, C., Kipriotis, E., Soldatos, P., Estimation of energy crops breakeven points in Northern Greece (2000) Proceedings of the 1st World Conference on Biomass for Energy and Industry, 1, pp. 463-466. , Kyritsis, S., Beenakers, A.A.C.M., Helm, P., Grassi, A., Chiaramondi, D. (Eds.), 5-9 June 2000, Seville, Spain. James \& James Ltd; 
Paraskevopoulou, A., (1987) Variation of Wood Structural Features of Cypress (Cupressus Sempervirens) in Greece, , Ph.D. Thesis, Institute of General Botany, University of Athens; 
Saikia, S.N., Goswami, T., Ali, F., Evaluation of pulp and paper making characteristics of certain fast growing plants (1997) Wood Sci. Technol., 31, pp. 467-475; 
Scott, W.E., Abbott, J., Trosset, S., (1995) Properties of Paper: An Introduction, , TAPPI Press, Atlanta, GA, USA; 
Seth, R.S., Page, D.H., Fiber properties and tearing resistance (1988) Tappi J., 71 (2), pp. 103-107; 
Shatalov, A.A., Pereira, H., Influence of stem morphology on pulp and paper properties of Arundo donax L. reed (2002) Ind. Crops Prod., 15, pp. 77-83; 
Smook, G.A., (1997) Handbook for Pulp and Paper Technologists, , Angus Wilde Publications, Vancouver; 
(1996) Ash in Wood, Pulp, Paper and Paperboard: Combustion at 525{\textdegree}C, , Committee of the Process and Product Quality Division, TAPPI, Atlanta, GA, USA; 
Updegraff, D.M., Semimicro determination of cellulose in biological materials (1969) Anal. Biochem., 32, pp. 420-424; 
Vallet, C., Chabbert, B., Czaniski, Y., Monties, B., Histochemistry of lignin deposition during schlerenchyma differentiation in alfalfa stems (1996) Ann. Bot., 78, pp. 625-632; 
Wiedermann, A., Reeds (1993) Pulp and Paper Manufacture, Secondary Fibers and Non-wood Pulping, pp. 94-104. , Kocurek, M.J. (Ed.), TAPPI Press, Atlanta, GA, USA; 
Young, R.A., Processing of agro-based resources into pulp and paper (1997) Paper and Composites from Agro-based Resources, pp. 137-245. , Rowell, R.M., Young, R.A., Rowell, J.K. (Eds.), CRC Press/Lewis Publishers, New York
},
	month = {2004},
	pages = {245 - 254},
	abstract = {Fiber dimensions and lignin and cellulose content of various highly productive, non-wood plants and agricultural residues were examined to assess their suitability for paper production. Plants like kenaf (Hibiscus cannabinus L.) and giant reed (Arundo donax L.) internodes gave very good derived values, especially slenderness ratio, which is directly comparable to some softwood and most hardwood species. Cotton (Gossypium hirsutum L.) stalks, miscanthus (Miscanthus {\texttimes} giganteus) and switchgrass (Panicum virgatum L.) have shorter fibers resulting to poorer flexibility and Runkel ratios, but still satisfactory slenderness ratios. Finally, fibers from olive tree (Olea europea L.) and almond tree (Prunus dulcis L.) prunings presented relatively short and thick fibers producing the poorest derived values among all the species examined. Fiber dimensions did not differ significantly within each species, when samples from different stalks/branches or different positions (base, middle top) were examined. The only exception were cotton stalks, where those differences did not have any significant effect on fiber derived values. Chemical analysis of the raw plant materials revealed satisfactory levels of α-cellulose content (close to 40\%) and Klason lignin content (<30\%) compared to those of hardwoods and softwoods. Relatively increased (>25\%) lignin content in miscanthus, switchgrass and almond prunings may require additional pulping time and chemical charge compared to those of other non-wood raw materials. Analysis of samples at various heights/lengths of the plant materials showed that lignin and cellulose content depends on tissue maturity, but does not change significantly within each species. {\textcopyright} 2003 Elsevier B.V. All rights reserved.},
	keywords = {Agricultural residues, Arundo donax, Cellulose, cotton fiber, Fiber dimensions, Gossypium hirsutum, Hardwoods, Hibiscus cannabinus, Hirsutum, Internodes, kenaf fiber, Lignin, Lignin and cellulose content, Lignins, Mechanical strength, Miscanthus, Natural fibers, Non-wood plants, Olea europaea, Panicum virgatum, Paper Making, Paper production, Papermaking, Phragmites, Prunus dulcis, Pulp manufacture, Softwoods},
	isbn = {09266690 (ISSN)},
	url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-1842737343\&doi=10.1016\%2fj.indcrop.2003.10.006\&partnerID=40\&md5=08f0309aeb5e744889c5ef98a1a5ffe9},
	author = {Ververis, C. and Georghiou, K. and Christodoulakis, N. and Santas, P. and Santas, R.}
}
